CFPXL - EP-N, EP-NII CARTRIDGE BLACK, R64-2001
- MSDS: CFPXL
- Manufacturer: CANON USA INC
- Product Name: EP-N, EP-NII CARTRIDGE BLACK, R64-2001
- National Stock Number: 6850-00N080127
Product Identification
Product ID:EP-N, EP-NII CARTRIDGE BLACK, R64-2001
MSDS Date:03/01/1993
FSC:6850
NIIN:00N080127
MSDS Number: CFPXL
Responsible Party
LAKE SUCCESS, NY 11042
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 516-328-5600
Cage: 1BA63
Contractor
Telephone: 516-328-5600
Cage: 1BA63
Ingredients
STYRENE ACRYLATE COPOLYMER
CAS: 25153-46-2
Fraction By Weight: 45-55%
OSHA PEL N/K
ACGIH TLV: N/K
IRON OXIDE
CAS: 1317-61-9
Fraction By Weight: 45-55%
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL RESPIRATORY TRACT IRRITATION
MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY DUST.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. EYE: FLUSH WITH PLENTY OF
WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS CONTACT
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INGESTION: CALL MD
IMMEDIATELY (FP N).
Fire Fighting
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC MATERIAL
IN POWDER FORM, IS CAPABLE OF CREATING DUST EXPLOSION.
Accidental Release
Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
OR HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF DUST AND SWEEP
MATERIAL ONTO PAPER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
AWAY FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4-1.6(H*2O=1)
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:NEGLIG
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND, PROBABLY CARBON
MONOXIDE.
Disposal
Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE REQUIRED. ENSURE
COMPLIANCE WITH FEDERAL, STATE AND/OR LOCAL REGULATIONS. EXHAUSTED
CARTRIDGE(S) MAY BE CONSIDERED PLASTIC WASTE AND IS COMPOSED OF
PLASTIC AND METALS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.